收藏本站
Chip Insertion – None ‐ DIP Encapsulation
Socket adapters are available for other encapsulations, including PLCC, QFP, and
SOIC. Refer to the Adapter Information on the Device Information screen. The
insertion follows the position of pin 1.
To identify pin 1 of the chip, look for a solid square or dot on the chip that gives
the information about the chip. It also indicates the first pin of the chip.
Direct ‐ connect :
For 144 ‐ pins adapters, connect directly to programmers.
Indirect ‐ connect
For 48 ‐ pins adapters, insert into DIP of the programmer.
Note : 1. Generally, the pins of the chip are downward when they are inserted.
However, as for the chip PLCC20, its pins should be upward.. This
insertion is called the ?Dead Bug? method.
2. SUPERPRO/5000 and SUPERPRO/5000E support 144 pins while
SUPERPRO/501S and SUPERPRO/500P only support 48 pins.
Device Configuration Word
Important : The device configuration word varies from device to device. Refer to
the device data manual for more information about the configuration
words. Set the configuration words according to the requirements of
your target system. Otherwise, you cannot use the device normally
even if it is normal when preparing and verifying the program.
Some single ‐ chip microcomputers allow special working modes, such as the
storage area mapping, the watchdog time, the clock, or the encryption. Set these
special modes through the Device Configuration Word option.
The user files contain the configuration words of some devices. When you load
these files, the system automatically loads the configuration words into the
configuration word buffer. However, you must select the configuration words for
some devices manually.
Select Device Configuration Word from the Device menu to open the
ConfigWord dialog box. The following sample illustration shows the
Superpro ? 5000 User’s Guide
37
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
D1U-12-CONC 12V D1U OUTPUT CONNECTOR CARD
D1U-48-CONC 48V D1U OUTPUT CONNECTOR CARD
D1U-52-CONC 52V D1U OUTPUT CONNECTOR CARD
D1U3CS-D-850-12-HC4C DC/DC FRNT END 850W 12V 3.3V AUX
相关代理商/技术参数
CX100A6 制造商:DANAHER SPECIALTY PRODUCTS 功能描述:TIMER, EAGLE SIGNAL, ELECTRONIC REPEAT CYCLE, LCD, 120V, CYCL-FLEX PANEL MT 制造商:Veeder-Root Company 功能描述:ELECTRONIC CYCLE TIMER 制造商:VEEDER ROOT 功能描述:ELECTRONIC CYCLE TIMER; Supply Voltage Range:120V AC; Time Min:0.01s; Time Max:199.9h; Reset Time:30ms; No. of Digits / Alpha:4-1/2; Supply Current:10A; Supply Voltage AC Max:120V; Time Range:0.01sec to 199hr 59min
CX100B6 制造商:Veeder-Root Company 功能描述:
CX100DB BLACK 100M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 100M
CX100DB BLACK 250M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 250M
CX-100H 制造商:Taiyo Electric Ind. 功能描述:
CX-100NUT 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-2C 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-3C 制造商:Taiyo Electric Ind. 功能描述: